Excelsior Entertainment Forums
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Home
Help
Login
Register
Excelsior Entertainment Forums
»
Chronopia
»
Painting & Terrain
»
Stripping Miniatures
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Stripping Miniatures (Read 7098 times)
Glenn M
Hero Member
Posts: 822
Karma: +29/-6
Stripping Miniatures
«
on:
March 18, 2008, 06:00:51 PM »
I am wondering, what stripping techniques have you all found most effective for Chronopia models.
I have a few figures that have just a coat of primer to remove, and then a bunch that have multiple coats of varnish and paint which all needs to go.
Thanks,
Glenn
Logged
Dr. Nick
Member Emeritus
Posts: 1054
Karma: +48/-16
Re: Stripping Miniatures
«
Reply #1 on:
March 19, 2008, 12:01:04 AM »
i used terpentine-replacement with good success.
break fluid is only for plastic figs, it works much worse (exept the non-destroy plastic bonus which you donīt need)
Logged
"Donīt anticipate outcome. Await the unfolding of events. Remain in the moment."
semai99
Sr. Member
Posts: 324
Karma: +7/-0
Re: Stripping Miniatures
«
Reply #2 on:
March 19, 2008, 08:51:16 AM »
This has been discussed in the Warzone section
http://forum54.oli.us/index.php?topic=4706.0
hope this helps
Logged
I came, I saw, I ran away
Glenn M
Hero Member
Posts: 822
Karma: +29/-6
Re: Stripping Miniatures
«
Reply #3 on:
March 19, 2008, 05:12:58 PM »
Well, I had tried Pinesol before, so I am trying it again, I also heard that Easy Off works wonders very quickly, so I nabbed a can of that to. We didn't have any Simply Green.
Logged
Moe
Jr. Member
Posts: 63
Karma: +2/-0
Re: Stripping Miniatures
«
Reply #4 on:
March 19, 2008, 05:33:30 PM »
acetone and a toothbrush. use in a well ventilated area.
Logged
ebay name- meislee
Veez
Member Emeritus
Posts: 2990
Karma: +159/-7
Re: Stripping Miniatures
«
Reply #5 on:
March 20, 2008, 03:18:38 AM »
I would note that earlier I espoused non-acetone nail polish remover; it works really well on pewter and plastic.
Apparently it does not work well on resin-it turns it into a spongy texture when left in over night. My Praetorian Behemoth that was going to be a Contagon Colossus is now decayed for real
. I will still use it for figs though since it strips the paint right off.
Logged
VeezCon products: Not as good as if they had been actually produced by a real figure company, but better than using your shoe to proxy with...sort of!
Alpha
FAQ Team
Sr. Member
Posts: 304
Karma: +17/-6
Re: Stripping Miniatures
«
Reply #6 on:
March 20, 2008, 07:48:33 AM »
I almost always use PineSol....but it's problematic around my house as the wife HATES the smell. Still, it strips metal fairly quickly and only harms the plastic if left in the solution for a prolonged time.
Logged
Arch Nemesis of the Pathetically Correct
Ebay Handle: Alpha-Male
pekulior
Journeyman
Posts: 37
Karma: +2/-0
Re: Stripping Miniatures
«
Reply #7 on:
March 25, 2008, 04:26:46 PM »
I have recently found that using Castrol Super Clean Cleaner/Degreaser works wonders on minis. It can be used on plastic and metal without harm to either. It pretty much dissolves the paint down to the bare miniature. However, make sure you wear gloves as it will strip the first couple layers of your skin too....doesn't hurt it's just annoying.
Logged
Glenn M
Hero Member
Posts: 822
Karma: +29/-6
Re: Stripping Miniatures
«
Reply #8 on:
March 25, 2008, 04:29:09 PM »
Hey Alpha, might I suggest trying the Wild Berry/Flower (Pink crap) scented. The odor is much less noticeable than the regular. My wife is perfectly happy with it.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Excelsior Entertainment Forums
»
Chronopia
»
Painting & Terrain
»
Stripping Miniatures