http://www.princeaugust.ie/target_games/tg9535.htmlThe link is for Ashigaru figs from Prince August. First decide which fig you want to use and then if you want to use a Gehenna Puker or one of the two styles of GW Flamers.
I recommend using the upper fig of the two pictured. Also, I don't recommend using the Gehenna Puker. Too freakin hard to convert in my opinion.
The two GW Flamers are similar with one major difference. The one WarzoneD used has a fuel bottle and the other one looks the same but has tanks that mount on the Flamer Specs back. Making the flamer is the same up tp the tank stage.
Step 1 - Take the top fig and leave off the spear.
Step 2 - Cut off the barrel of the weapon
Step 3 - File the sides of the weapon down and trim the top and bottom to form a tab.
Step 4 - Take the GW Flamer and cut off the igniter front piece.
Step 5 - Use a pin vice and drill out two or three holes.
Step 6 - File the holes into a slot.
Step 7 - Fit the tab on the weapon to the slot on the igniter front piece.
Mounting the fuel bottle
- The fuel bottle can be mounted behind the foregrip hand but I honestly think it would look wrong. I think it would look better mounted on the side like the magazine for a British Sten Gun.
Mounting the backpack tank.
- If you use the tank that comes with the flamer then it should be fairly straight forward. ColdThunder actuually made a cool tank for a flamer conversion from a couple of old GW Space Marine shoulder pads and a piece of wire.