Just wanted everyone to know I am working on a modular terrain board to be completed prior to Talamania V (Insert official title here).
The board will be 4' x 4' Industrial (active).
It will consist of 4 18" by 18" sections that can rotate 360 degrees, 13 6" x 6" sections (360 degrees) and 30 3" by 6" sections (180 degrees).
The 4 18" x 18" sections will be centered in each 2x2 section of the board. I will attached a file to help explain it all (as soon as I figure out how). I am sure it will not be complicated to do.
The 6x6 and 3x6 board pieces will be made out of Hirst Art molds and the 18" x 18" pieces will be made of 3/8 wood board with various building pieces on it (mainly Hirst Arts molds).
I have purchased 5 molds for this and other projects and plan on purchasing 5 additional ones soon. (needed to complete this and other projects).
I would like to post progress here and get your feedback if possible.
I usually cast up to 3 molds over night and I think I have figured out most of the details needed to complete the project.
Because I can rotate the board pieces with a little math it has the following variations - (4x4x4x13x13x4x30x30x2) that would be 77,875,200 different ignoring the fact that 2 3x6 boards can fit into the 6x6 slots.